Search results for "Raw material"
showing 10 items of 204 documents
X-ray diffraction Warren–Averbach mullite analysis in whiteware porcelains: influence of kaolin raw material
2018
ABSTRACTCompositional and microstructural analysis of mullites in porcelain whitewares obtained by the firing of two blends of identical triaxial composition using a kaolin B consisting of ‘higher-crystallinity’ kaolinite or a finer halloysitic kaolin M of lower crystal order was performed. No significant changes in the average Al2O3 contents (near the stoichiometric composition 3:2) of the mullites were observed. Fast and slow firing at the same temperature using B or M kaolin yielded different mullite contents. The Warren–Averbach method showed increase of the D110 mullite crystallite size and crystallite size distributions with small shifts to greater values with increasing firing temper…
Research Regarding the Physical-Mechanical Properties of Knits for Garments – Abrasion Resistance
2017
Abstract During wear, the fabric is subjected to a complex combination of forces acting at various rates, in various intensities, in various directions and for various periods. This is one of the main causes of a fabric and garment becoming unacceptable for further wear. The main goal of this research paper is to improve the physical-mechanical properties of knits for garments by choosing the right fabric structure and raw material. The abrasion resistance is a mechanical deterioration and progressive loss of substance from a fabric, resulting from the fabric rubbing against itself or another surface. Tests was done on weft knitted fabric for garments using cotton, wool and mixed yarns, thr…
L’ évolution des assemblages lithiques des niveaux du Paléolithique moyen de l’Abrigo de la Quebrada (Valencia, Espagne)
2018
L’Abrigo de la Quebrada propose une séquence stratigraphique importante, avec neuf niveaux dont sept présentent des preuves d’occupation appartenant au Paléolithique moyen. De plus, l’existence d’un niveau stérile, le VI, séparant les niveaux supérieurs (II à V) des niveaux inférieurs (VII à IX), permet d’évaluer, dans une perspective diachronique, les changements constatés sur les différentes matiàres premières et sur les systémes de débitage employés pour chacune de ces deux grandes phases. Ces donne´ es sont compare´ es a` d’autres sites contemporains, dans le but d’e´valuer les normes technologiques et la gestion des ressources des ne´ andertaliens dans la zone ge´ographique de la re´gi…
The production of traditional building materials in Oristano (Sardinia, Italy)
2016
The study of ceramic-making communities which employ traditional practices can provide insights into the raw materials and techniques used over the centuries in a particular territory. The archaeometric study of ceramic products and of the raw materials used in their production is an effective complement to the existing ethnographic information. This paper focuses on the brick and tile making tradition of Oristano, a town in Central-Western Sardinia (Italy). Applying a combination of techniques, it includes an extensive analysis of traditional handmade and early industrial bricks and tiles, and a study of the local clays that may have been used as raw materials. Although we were unable to s…
Consolidation of earthen building materials: a comparative study
2019
The consolidation and protection of mud bricks are a challenge in the field of conservation of archeological sites. One of the solutions is represented by the coverage of the entire excavation that assures a protection against mud dissolution. Unfortunately, this is not always feasible, both for economical and practical issues. For these reasons, alternative solutions are needed. In this work, laboratory experimentation has been carried out in order to test the efficacy of some products to slow down the dissolution process and increase the brick toughness. Three typologies of raw materials taken from different outcrops (one from the Republic of Azerbaijan and two from Calabria region, Italy…
Rethinking the perishable: Identifying organic remains in metal objects at the Iron Age site of La Bastida de les Alcusses (Moixent, Spain)
2019
Abstract The use of certain perishable materials for handicraft, such as wood, has been underestimated in archaeological investigation due to their poor preservation. Its study through indirect evidence (other non-perishable materials, ethnographic sources) is partial, and does not account for the real importance of wood in domestic, craft and ritual contexts in past societies. In this review we reclaim the use of wood as a co-constitutive material of objects by focusing on Iron Age tools, weapons and carpentry elements from a case-study in the Western Mediterranean. We also suggest the adoption of protocols for sampling and analysing the remains of wood adhered to metal objects, which may …
Ceramic productions and human interactions during the Early Bronze Age in northern Iberia
2021
The Early Bronze Age ceramic collection found into the caves of La Llana and El Toral III in Asturias (Spain) presents common decoration such as that found in the centre of Cantabrian Spain from the same period, which resembles others found in the Ebro Valley and Atlantic Europe. Therefore, the main objective of this study it is to identify the raw material origin and understand the pottery production process during the Early Bronze Age in the Cantabrian region. A methodological approach based on the chemical and mineralogical analysis of vessels and experimentally fired clay samples collected all over the centre of this region was developed. Furthermore, the post-depositional processes aff…
Ceramic raw materials: how to recognize them and locate the supply basins—mineralogy, petrography
2020
This tutorial paper is focused on the mineralogical-petrographic characterization of clayey raw materials with the purpose of sourcing supply basins and answering questions about the provenance of the corresponding archaeological ceramic artefacts. The first part gives general indications of how to profitably study archaeological ceramic thin sections through the polarizing microscope. Brief notes are provided on the theoretical basis of optical microscopy. A scheme is then provided for the petrographic description of ceramic samples, concerning the textural and compositional characteristics of aplastic inclusions and groundmass. Suggestions are also given for identifying any minero-petrogr…
Captación y selección de materias primas en la primera metalurgia del Sureste de la península ibérica
2020
The authors are grateful for the technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). We are also in debt with Eduardo Galán, Ruth Maicas and Carmen Cacho, curators of the Museo Arqueológico Nacional (Madrid) for facilitating the sampling and study of metal objects as well as with Ignacio Soriano Llopis for his help on the selection and sampling of the Palmela points, with Massimo Chiaradia who performed the analyses of the Palmela points at the Department of Earth Sciences (University of Geneva, Switzerland) and with Óscar García Vuelta for his pictures of some assemblages. We also appreciate and the careful work of editing and style of the TP edit…
Glycolipid Biosurfactant Production from Waste Cooking Oils by Yeast: Review of Substrates, Producers and Products
2021
Biosurfactants are a microbially synthesized alternative to synthetic surfactants, one of the most important bulk chemicals. Some yeast species are proven to be exceptional biosurfactant producers, while others are emerging producers. A set of factors affects the type, amount, and properties of the biosurfactant produced, as well as the environmental impact and costs of biosurfactant’s production. Exploring waste cooking oil as a substrate for biosurfactants’ production serves as an effective cost-cutting strategy, yet it has some limitations. This review explores the existing knowledge on utilizing waste cooking oil as a feedstock to produce glycolipid biosurfactants by yeast. The review f…